1000–500 thickness
GFS, ECMWF, ECMWF AIFS, GEM · Run 00Z 22 Nov · +42 h · Valid Mon 18Z 23 Nov
Gap between the deepest and shallowest 1000–500 thickness of these models
Region Europe
The readings under the map are for the whole map, not only the part shown.
GFS, ECMWF, ECMWF AIFS, GEM · Run 00Z 22 Nov · +42 h · Valid Mon 18Z 23 Nov
Gap between the deepest and shallowest 1000–500 thickness of these models
Widest gap 7.6 dam, 145 mi NNE of Ponta Delgada, Portugal · unshaded ground is where all 4 land within 3 dam of each other
Shows where the models disagree about how deep the lowest 5 km of the atmosphere is at 18Z 23 Nov: the day you choose, always at the same hour so that successive days compare.
Thin lines are the thickness every 6 dam, computed from the median of the 4 models at each point, so no single model forecast them. The heavy line is 540, the one forecasters read as the rain/snow boundary.
Methodology
The 1000–500 thickness is how far apart the 1000 mb and 500 mb pressure surfaces are: the depth of the lowest ~5 km of the atmosphere, which grows as that column warms. It measures the whole column rather than the air at 2 meters height, which is why forecasters use the 540 dam line as the rain/snow boundary even when the surface reads 35°F.
Computed as 500 mb height minus 1000 mb height from GFS, ECMWF, ECMWF AIFS, GEM: four models from three agencies. Two of these are ECMWF's, and where those two agree, it is partly because they come from one agency. Uncorrected model output on every side, subtracted after every model is sampled onto one lattice by coordinate.
The band edges come from twenty valid times, when the four sat within 3 dam of each other on about half the frame and more than 10 dam apart on one cell in a hundred. Its spread is not the 500 mb height spread under another name: the two differ most at the short leads.
Thickness is in decameters (tens of meters), the unit every chart of it uses: 540 is 5,400 m. There is no metric variant of this map, because there is no second convention to offer.
540 marks a column cold enough through its depth for snow to survive the fall. What reaches the ground also depends on a warm nose, the surface layer and how hard it is precipitating; this map draws no precipitation type.
Shading shows where the models disagree; the map cannot say which of them is right.
This map is drawn from model output we store ourselves, based on data and products of NOAA, the European Centre for Medium-Range Weather Forecasts (ECMWF) and Environment and Climate Change Canada. Each city's spread for the same day, and the written discussion of it, are on the national page. Every model's full forecast for any of these cities, or anywhere else, is in the beta: request an invite; it's free during the beta.
Sources and licenses
- NOAA: GFS, from NOAA's NOMADS server. US government data, not subject to copyright (NOAA/NWS terms of use).
- ECMWF: IFS and AIFS Single, from ECMWF's open data. This service is based on data and products of the European Centre for Medium-Range Weather Forecasts (ECMWF). Source: www.ecmwf.int. This ECMWF data is published under a Creative Commons Attribution 4.0 International (CC BY 4.0). ECMWF does not accept any liability whatsoever for any error or omission in the data, their availability, or for any loss or damage arising from their use.
- Environment and Climate Change Canada: GEM, from the MSC Datamart. Data Source: Environment and Climate Change Canada, under its Data Services End-use Licence.
What we change: each field is cropped to the frame these maps share when we download it, and each map then smooths, contours, differences or ranks those numbers as its Methodology says. These are our maps of the providers' numbers, not their products, and none of them has reviewed or endorsed this site.
Coastlines, borders, lakes and place names: Natural Earth, public domain.